Dieses Bild zeigt Stephan Staudacher

Stephan Staudacher

Herr Prof. Dr.-Ing.

Institutsdirektor
Institut für Luftfahrtantriebe

Kontakt

+49 711 685 63597
+49 711 685 63505

Visitenkarte (VCF)

Pfaffenwaldring 6
70569 Stuttgart
Deutschland
Raum: 1/5

Sprechstunde

Eine persönliche Sprechstunde ist gerne nach vorheriger Terminvereinbarung möglich. Hierzu nehmen Sie Kontakt zum ILA-Sekretariat auf.

Bitte folgende FAQ lesen.

Peer Reviewed Journal Papers:

[40] Weiss M., Staudacher S., Mathes J., Becchio D., Keller C.:
Uncertainty Quantification for Full-Flight Data Based Engine Fault Detection
With Neural Networks
Machines 2022, 10(10), 846; https://doi.org/10.3390/machines10100846

 

[39] Schlette T., Staudacher S.:
Preliminary Design and Analysis of Supersonic Business Jet Engines
MDPI, Aerospace 2022, 9(9), 493; https://doi.org/10.3390/aerospace9090493

 

[38] Altmeppen J., Sommerfeld H., Koch C., Staudacher S.:
Experimental and Numerical Investigation into the Effect of Surface Roughness on
Particle Rebound
Frontiers in Mechanical Engineering, 2022

 

[37] Lorenz M., Klein M., Hartmann J., Koch C., Staudacher S.:
Prediction of Compressor Blade Erosion Experiments Based on Flat Plate
Specimen
Frontiers in Mechanical Engineering, 2022

 

[36] Weiss M., Staudacher S., Becchio D., Keller C., Mathes J.:
Steady-State Fault Detection with Full-Flight Data
MDPI, Machines 2022, 10(2), 140, https://doi.org/10.3390/machines10020140

 

[35] Baumann M., Koch C., Staudacher S.:
Application of Neural Networks and Transfer Learning to Turbomachinery Heat
Transfer
MDPI, Aerospace 2022, 9, 49. https://doi.org/10.3390/aerospace9020049

 

[34] Altmeppen J., Nekic R., Wagenplast P., Staudacher S.:
Transient Simulation of Particle Transport and Deposition in The Selective
Laser Melting Process: A New Approach to Model Particle and Heat Ejection
From The Melting Pool
Additive Manufacturing, Vol 46, Oct. 2021, 102135

 

[33] Brandes T., Koch C., Staudacher S.:
Estimation of Aircraft Engine Flight Mission Severity Caused By Erosion
ASME Journal of Turbomachinery, 143(11), TURBO-21-1021

 

[32] Nagorski M., Koch C., Staudacher S.:
Boundary Conditions for Compressor Cascade Ice Crystal Icing Testing
ASME Journal of Turbomachinery, 143(10), TURBO-21-1018

 

[31] Chatzianagnostou D., Staudacher S.
Comparison of Piston Concept Design Solutions for Composite Cycle Engines
Part II: Design Considerations
J. Eng. Gas Turbines Power. Aug 2021, 143(8), GTP-20-1575, 2021.

 

[30] Altmeppen J., Sommerfeld H., Koch C., Staudacher S.:
An Analytical Approach to Estimate the Effect of Surface Roughness on
Particle Rebound
J. Glob. Power Propuls. Soc. 2020; 4: 27–37

 

[29] Klein F., Staudacher S.:
Cycle Optimization Potential of Composite Cycle and Turbo-compound Aero-
Engines
ASME Journal of Engineering for Gas Turbines and Power, GTP-19-1746

 

[28] Baumann M., Koch C., Staudacher S.:
Experimental Identification of Steady State Turbomachinery Heat Transfer
Using Non-Dimensional Groups
ASME Journal of Heat Transfer, Jun 2020, 142(6), HT-19-1655

 

[27] Barth F., Staudacher S., Schiewe C.:
ATF Humidity Control to Generate Defined Icing Conditions
ASME Journal of Engineering for Gas Turbines and Power, 142(2), Feb. 2020, GTP-19-1226

 

[26] König J., Weißschuh M., von Ende S., Staudacher S.:
The Effect of Rated Climb Performance on Low Cycle Fatigue of a Civil
Turbojet Engine
ASME Journal of Engineering for Gas Turbines and Power, GTP-19-1406

 

[25] Barth F., Staudacher S.:
Dew Point Measurement at the Stuttgart University ATF
CEAS Aeronaut J (2019). https://doi.org/10.1007/s13272-019-00419-9

 

[24] Hufnagel M., Staudacher S., Koch C.:
Experimental and Numerical Investigation of the Mechanical and Aerodynamic
Particle Size Effect in High-speed Erosive Flows
ASME Journal of Engineering for Gas Turbines and Power, GTP-18-1126

 

[23] Mall J., Staudacher S.:
Evaluation of Assemblability during Aero Engine Preliminary Design
CEAS Aeronaut J (2018) 9: 147. https://doi.org/10.1007/s13272-017-0278-8

 

[22] Chatzianagnostou D., Staudacher S.:
Comparison of Piston Concept Design Solutions for Composite Cycle Engines
Part I: Similarity Considerations
J. Eng. Gas Turbines Power. Sep 2018, 140(9), GTP-17-1363, 2018.

 

[21] Felix Klein, Stephan Staudacher:
Plausibility Study of Hecto Pressure Ratio Concepts in Large Civil Aero Engines
ASME Journal of Engineering for Gas Turbines and Power, 2017, 140(5)
GTP-17-1275

 

[20] Max Hufnagel; Christian Werner-Spatz; Christian Koch; Stephan Staudacher:
High-Speed Shadowgraphy Measurements of an Erosive Particle-Laden Jet Under
High-Pressure Compressor Conditions
ASME Journal of Engineering for Gas Turbines and Power, 2018, 140(1),
GTP-17-1293

 

[19] Putz A., Staudacher S., Koch C., Brandes T.:
Jet Engine Gas Path Analysis Based on Takeoff Performance Snapshots
ASME Journal of Engineering for Gas Turbines and Power, 2017, 139(11)
GTP-16-1568

 

[18] Döring F., Staudacher S., Koch C.:
Modeling of Particle Deposition Effects in Aircraft Engine Compressors
ASME Journal of Turbomachinery 2017, 139(5), Turbo-16-1139

 

[17] Arenz M., Weigel B., Habermann J., Staudacher S., Rose M., Lutum E., Berns W.:
Development and Application of a Fast Response Total Temperature Probe
for Turbomachinery
ASME Journal of Turbomachinery 2017, 139(5), Turbo-16-1280

 

[16] Martin Lipfert, Jan Habermann, Martin Rose, Stephan Staudacher, Yavuz
Guendogdu:
Blade–Row Interactions in a Low Pressure Turbine at Design and Strong Off-
Design Operation
ASME Journal of Turbomachinery 136(11), 2014

 

[15] Christoph Reményi, Stephan Staudacher:
Systematic simulation based approach for the identification and implementation of a
scheduling rule in the aircraft engine maintenance
International Journal of Production Economics Volume. 147, Part A, 2014

 

[14] Martin Lipfert, Martin Marx, Martin Rose, Stephan Staudacher, Inga Mahle, Udo
Freygang, Markus Brettschneider:
A low pressure turbine at extreme off-design operation
ASME Journal of Turbomachinery 136(3), 2013

 

[13] Carsten Schneider, Daniel Schrack, Matthias Kuerner, Martin Rose, Stephan
Staudacher, Yavuz Guendogdu, Udo Freygang:
On the Unsteady Formation of Secondary Flow Inside a Rotating Turbine Blade
Passage
ASME Journal of Turbomachinery 136(6), 2013

 

[12] Eugen Lutoschkin, Martin Rose, Stephan Staudacher:
Pressure-Gain Combustion Using Shock–Flame Interaction
AIAA Journal of Propulsion and Power 29/5, 2013

 

[11] Bernhard Lehmayr, Stephan Staudacher:
A statistical model for scatter representation in stress life curves
Fatigue & Fracture of Engineering Materials & Structures Volume 35, Iss. 4, 2012

 

[10] Matthias Kürner, Georg A. Reichstein, Daniel Schrack, Martin Rose, Stephan
Staudacher, Jochen Gier, Karl Engel:
Low Pressure Turbine Secondary Vortices: Reynolds Lapse
ASME Journal of Turbomachinery 134(6), 061022, 2012

 

[9] Daniel Nagy, Stephan Staudacher:
Integrated Gas Turbine Health Monitoring System
ELSEVIER International Journal of Power and Energy Systems 01/2011 31(4) 2011

 

[8] Kern M., Horn W., Hiller S.-J-., Staudacher S.:
Effects of tip injection on the performance of a multi-stage high-pressure
Compressor
CEAS Aeronautical Journal, 2(1-4), pp. 99-110, 2011

 

[7] Holger Lipowsky, Stephan Staudacher, Michael Bauer, Klaus-Juergen
Schmidt:
Application of Bayesian Forecasting to Change Detection and Prognosis of Gas
Turbine Performance
ASME Journal of Engineering for Gas Turbines and Power. 132(3), 031602, 2009

 

[6] Wolfgang Horn, Klaus-Jürgen Schmidt, Stephan Staudacher:
Effects of Compressor Tip Injection on Aircraft Engine Performance and Stability
ASME Journal of Turbomachinery 131(3), 031011, 2009

 

[5] Gerrit Schütte, Stephan Staudacher:
Probabilistic Aspects of Scramjet Design
AIAA Journal of Propulsion and Power. Vol. 25, No. 2, 2009

 

[4] Lutz Aurahs, Christian Kasper, Matthias Kürner, Martin Rose, Stephan Staudacher,
Jochen Gier:
Water flow model turbine flow visualization study of the unsteady interaction of
secondary flow vortices with the downstream rotor
Proc. IMechE. Vol. 223 Part A: Journal of Power and Energy, 2009

 

[3] Stefan Spieler, Stephan Staudacher, Roland Fiola, Peter Sahm, Matthias
Weißschuh:
Probabilistic Engine Performance Scatter and Deterioration Modeling
ASME Journal of Engineering for Gas Turbines Power. 130(4), 042507, 2008

 

[2] Michael Bauer, Stephan Staudacher:
Fully Automated Model-Based Performance Analysis Procedure for On-Line and
Off-Line Applications
ASME Journal of Turbomachinery 130(1), 011007, 2007

 

[1] Nielsen A., Moll C., Staudacher S.:
Modelling and Validation of the Thermal Effects on Gas Turbine
Transients
Journal of Engineering for Gas Turbines and Power

 

Peer Reviewed Conference Papers:

 

[81] Scarso S., Staudacher S., Keller C., Mathes J.:
Mission Severity Assessment Based on 1Hz Engine Data
ASME Turbo Expo GT2022-80923, 2022

 

[80] Hartmann J., Lorenz M., Klein M., Staudacher S.
The Effect of an Entirely Eroded Airfoil on The Aerodynamic Performance of a
Supersonic Compressor Cascade
ASME Turbo Expo GT2022-81752, 2022

 

[79] Klein M., Staudacher S., Abu-Taa K., Schwengler J.:
Digital Service Twin To Assess Engine Deterioration And Remaining Part Life
ASME Turbo Expo GT2022-82113, 2022

 

[78] Varchev T., Weiss M., Staudacher S., Koch C.:
Transient Engine Condition Monitoring of Micro Gas Turbines in a Highly
Dynamic Setting
ASME Turbo Expo GT2022-82377, 2022

 

[77] Brandes T., Scarso S., Koch C., Staudacher S.:
Data-driven Analysis of Engine Mission Severity Using Non-dimensional
Groups
ASME Turbo Expo GT2021-58673, 2021

 

[76] Nagorski M., Koch C., Staudacher S.:
Boundary Conditions for Compressor Cascade Ice Crystal Icing Testing
ASME Turbo Expo GT2020-16143, 2020

 

[75] Brandes T., Koch C., Staudacher S.:
Estimation of Aircraft Flight Mission Severity Caused by Erosion
ASME Turbo Expo GT2020-16297, 2020

 

[74] Casari N., Altmeppen J., Koch C., Pinelli M., Staudacher S., Suman A.,
Vulpio A.:
Numerical Analysis of Particle Deposition in an Aircraft Engine Compressor
Cascade
ASME Turbo Expo GT2020-14506, 2020

 

[73] Altmeppen J., Sommerfeld H., Koch C., Staudacher S.:
An Analytical Approach to Estimate the Effect of Surface Roughness on
Particle Rebound
GPPS Bejing Conference, GPPS-BJ-2019-0099, September 2019

 

[72] Schiewe C., Staudacher S., Elter M.:
Automation of Stuttgart University’s Multi- Functional Altitude Test Facility
International Symposium on Airbreathing Engines, ISABE-2019-24122, 2019

 

[71] König J., Weißschuh M., von Ende S., Staudacher S.:
The Effect of Rated Climb Performance on Low Cycle Fatigue of a Civil
Turbojet Engine
ASME Turbo Expo GT2019-91190, 2019

 

[70] Sokolov M., Lorenz M., Rostamian M., Koch C., Weißschuh M., Staudacher S.:
Novel Approach to High Speed Linear Cascade Design
ASME Turbo Expo GT2019-90743, 2019

 

[69] Leitner M., Rose M., Staudacher S.:
Study of the Tip Leakage Flow in a Compressor Cascade with Incidence
Exceeding the Stability Limit
ASME Turbo Expo GT-2019-90224, 2019

 

[68] Schiewe C., Neuburger N., Staudacher S.:
How Future Propulsion Systems Influence Future Component Testing: Latest
Results From Stuttgart University‘s Altitude Test Facility
Proceedings of Global Power and Propulsion Society,
Technical Conference, GPPS-TC-2019-051, January 2019

 

[67] Mall J., Staudacher S.:
The Assessment of Assemblability and Dissassemblability of Aero Engines
During Preliminary Design
ASME Turbo Expo GT2018-75615, 2018

 

[66] Vogel H., Kando A., Schulte H., Staudacher S.:
A Top-Down Approach for Quantifying the Contribution of Deterioration
Mechanisms to the Performance Deterioration of Turbofan Engines
ASME Turbo Expo GT2018-75558, 2018

 

[65] Döring F., Staudacher S., Koch C.:
Predicting The Temporal Progression Of Aircraft Engine Compressor
Performance Deterioration Due to Particle Deposition
ASME Turbo Expo GT2017-63544, 2017

 

[64] Hufnagel M., Koch C. Staudacher S., Werner-Spatz C.:
High Speed Shaodgraphy Measurements of an Erosive Particle-Laden Jet
Under High-Pressure Compressor Conditions
ASME Turbo Expo GT2017-63419, 2017

 

[63] Klein F., Staudacher S.:
Plausibility Study of Hecto Pressure Ratio Concepts in Large Civil Aero
Engines
ASME Turbo Expo GT2017-64214, 2017

 

[62] Arenz M., Weigel B., Habermann J., Staudacher S., Rose M., Lutum E.,
Berns W.:
Development and Application of a Fast Response Total Temperature Probe
for Turbomachinery
ASME Turbo Expo. GT2016-56132, 2016

 

[61] Schulze C., Habermann J., Staudacher S., Rose M., Freygang U.:
Influence of Inflow Turbulence and Distortion on a Two-Stage Low Pressure
Axial Turbine at Low Reynoldsnumbers
ASME Turbo Expo. GT2016-56134, 2016

 

[60] Habermann J., Arenz M., Staudacher S., Rose M., Guendogdu H., Raab I.:
Reynolds Stress Anisotropy in a Two-Stage Low Pressure Axial Turbine at
Low Reynolds Numbers
ASME Turbo Expo. GT2016-56133, 2016

 

[59] Tisarev A., Falaleev S., Koch C., Nagorski M., Staudacher S.:
Natural Cooling Affecting the Restart of Micro Gas Turbine
ASME Turbo Expo. GT2016-56982, 2016

 

[58] Martin Marx, Michael Kotulla, André Kando, Stephan Staudacher:
Comparison and Synthesis of Performance and Aerodynamic Modeling of a
Pass-Off Turbofan Engine Test Cell
ASME Turbo Expo. GT2015-43525, 2015

 

[57] Marcus Schrade, Stephan Staudacher, Matthias Voigt:
Experimental and Numerical Investigation of Erosive Change of Shape for
High-Pressure Compressors
ASME Turbo Expo. GT2015-42061, 2015

 

[56] Florian Schmidt, Stephan Staudacher:
Generalized Thermodynamic Assessment of Concepts for Increasing the
Efficiency of Civil Aircraft Propulsion Systems
ASME Turbo Expo. GT2015-42447, 2015

 

[55] Eva Kerber, Bernhard Weigand, Florian Schmidt, Stephan Staudacher:
Second Law Analysis of Thermodynamic Cycles for Aero Engines
ASME Turbo Expo. GT2015-43295, 2015

 

[54] Martin Lipfert, Martin Marx, Jan Habermann, Martin G. Rose, Stephan
Staudacher, Yavuz Guendogdu, Udo Freygang:
Secondary Deviation And Unsteady Blockage In An LP Turbine Due To Off-
Design Operation
ASME Turbo Expo. GT2015-43118, 2015

 

[53] Martin Marx, Martin Lipfert, Martin Rose, Stephan Staudacher, Karl Engel:
Unsteady Work and Wake Recovery due to Pressure Wave Interaction in a LP
Turbine
ASME Turbo Expo. GT2015-43276, 2015

 

[52]Martin Lipfert, Jan Habermann, Martin Rose, Stephan Staudacher:
Blade Row Interactions In An LP Turbine AT Design And Strong Off-Design
Operation
ASME Turbo Expo. GT2014-25343, 2014

 

[51] Ivan Zhdanov, Stephan Staudacher, Sergey Falaleev:
An Advanced Usage of Meanline Loss Systems for Axial Turbine Design
Optimisation
ASME Turbo Expo. GT2013-94323, 2013

 

[50] Martin Lipfert, Martin Marx, Martin Rose, Stephan Staudacher, Inga Mahle,
Udo Freygang, Markus Brettschneider:
An LP Turbine At Extreme Off-Design Operation
ASME Turbo Expo. GT-2013-94631, 2013

 

[49] Carsten Schneider, Daniel Schrack, Matthias Kürner, Martin Rose, Stephan
Staudacher, Yavuz Guendogdu, Udo Freygang:
On The Unsteady Formation Of Secondary Flow Inside A Rotating Turbine
Blade Passage
ASME Turbo Expo. GT-2013-94091, 2013

 

[48] Daniel Schrack, Carsten M. Schneider, M. Fraas, Martin G. Rose, Stephan
Staudacher:
Unsteady Secondary Flow in a Low Pressure Turbine With Integrated 3D
Design
ASME Turbo Expo. GT2013-95700, 2013

 

[47] Martin Marx, Martin Lipfert, Martin Rose, Stephan Staudacher, Detlef
Korte:
Unsteady Work Processes Within A Low Pressure Turbine Vane Passage
ASME Turbo Expo. GT-2013-94234, 2013

 

[46] Marcus Schrade, Stephan Staudacher, Matthias Weißschuh, Matthias Voigt:
Form Factor for the Top-Level Comparison of the Condition of Supply of High-
Pressure Compressor Blades
ASME Gas Turbine India Conference. GTINDIA2012-9599, 2012

 

[45] Georg A. Reichstein, Martin G. Rose, Stephan Staudacher, Karl Engel:
Numerical Study of Reynolds Number Effects of Cavity Volumes and Seal
Gaps on LP Turbine Performance
ASME Turbo Expo. GT-2012-68261, 2012

 

[44] Carsten Schneider, Martin Rose, Stephan Staudacher, Adam Heisler, Franz
Lippl, Irene Raab:
On The Assessment Of Turbine Efficiency from Experimental Data For Low
Pressure Turbines At Low Reynolds Numbers
ASME Turbo Expo. GT-2012-69435, 2012

 

[43] Matthias Kürner, Martin Rose, Stephan Staudacher, Jochen Gier, Andreas
Fiala, Bastian Patzer:
Surface Thin Film Gauge Measurements In A Two-Stage Low Pressure
Turbine At Low Reynolds Number
ASME Turbo Expo. GT-2012-68906, 2012

 

[42] Jenny Baumann, Ulrich Rist, Martin Rose, Tobias Ries, Stephan Staudacher:
Actuated Transition in an LP Turbine Laminar Separation: An Experimental
Approach
ASME Turbo Expo. GT2011-45852, 2011

 

[41] Nina Hepperle, Dirk Therkorn, Ernst Schneider, Stephan Staudacher:
Assessment of Gas Turbine and Combined Cycle Power Plant Performance
Degradation. ASME Turbo Expo. GT2011-45375, 2011

 

[40] Alexander Klötzer, Stephan Staudacher, Matthias Weißschuh:
Investigations on the Influence of Altitude Conditions on Mixed
Exhaust Systems
ASME Turbo Expo. GT2011-46175, 2011

 

[39] Matthias Kürner, Georg A. Reichstein, Daniel Schrack, Martin Rose, Stephan
Staudacher, Jochen Gier, Karl Engel:
LP Turbine Secondary Vortices: Reynolds Lapse
ASME Turbo Expo. GT2011-45557, 2011

 

[38] Christoph Reményi, Stephan Staudacher, Nicole Holzheimer, Stephan Schulz:
Simulation of the maintenance process in an aircraft engine maintenance
company
CIRP International Conference on Manufacturing Systems, 2011

 

[37] Reményi, C., Staudacher, S., Becker, H., Dinc, S., Manejev, R., Fichtelmann, R.:
Decentralized Job-shop Control for the Maintenance of Aircraft Engines
Proceedings of the 21st ICPR International Conference on Production Research,
July 31 - August 4, 2011, Stuttgart

 

[36] Fabian Donus, Stefan Bretschneider, Reinhold Schaber, Stephan Staudacher:
The Architecture and Application of Preliminary Design Systems
ASME Turbo Expo. GT2011-45614, 2011

 

[35] Norbert Schinko, Martin Marx, Martin Rose, Stephan Staudacher, Jochen Gier,
Norbert Hübner:
"Online Throughflow"- Automatic Simultaneous Simulation of an Axial Flow
Turbine
ASME Turbo Expo. GT-2010-22240, 2010

 

[34] Fabian Donus, Reinhold Schaber, Klaus-Juergen Schmidt, Stephan
Staudacher:
Accuracy of Analytical Engine Weight Estimation During the Conceptual
Design Phase
ASME Turbo Expo. GT2010-23774, 2010

 

[33] Matthias Kürner, Carsten Schneider, Martin Rose, Stephan Staudacher,
Jochen Gier:
LP Turbine Reynolds Lapse Phenomena: Time Averaged Area Traverse And
Multistage CFD
ASME Turbo Expo. GT-2010-23114, 2010

 

[32] Friederike Gräter, Stephan Staudacher, Matthias Weißschuh:
Operator-Specific Engine Trending Using a Feature-Based Model
ASME Turbo Expo. GT2010-22496, 2010

 

[31] Matthias Müller, Stephan Staudacher, Winfried-Hagen Friedl, Rene Köhler,
Matthias Weißschuh:
Probabilistic Engine Maintenance Modeling for Varying Environmental and
Operating Conditions
ASME Turbo Expo. GT2010-22548, 2010

 

[30] Christian Knipser, Wolfgang Horn, Stephan Staudacher:
Aircraft Engine Performance Improvement by Active Clearance Control in Low
Pressure Turbines
ASME Turbo Expo. GT2009-59301, 2009

 

[29] Holger Lipowsky, Stephan Staudacher, Michael Bauer, Klaus-Jürgen Schmidt:
Application of Bayesian Forecasting to Change Detection and Prognosis of
Gas Turbine Performance
ASME Turbo Expo. GT2009-59447, 2009

 

[28] Tobias Ries, Frederick Mohr, Jenny Baumann, Martin Rose, Ulrich Rist, Irene
Raab, Stephan Staudacher:
LP Turbine Laminar Separation With Actuated Transition: DNS, Experiment
and Fluidic Oscillator CFD
ASME Turbo Expo. GT2009-59600, 2009

 

[27] Ivo Sandor, Stephan Staudacher, Gernot Hertweck:
Micro Jet Engine Oil Consumption Measurement Technique
ASME Turbo Expo. GT2009-59800, 2009

 

[26] Matthias Haake, Roland Fiola, Stephan Staudacher:
Multistage Compressor and Turbine Modeling for the Prediction of the
Maximum Turbine Speed Resulting From Shaft Breakage
ASME Turbo Expo. GT2009-59049, 2009

 

[25] Florian Kroll, Ivo Sandor, Stephan Staudacher:
System dynamics of a hardware in the loop simulation of a hybrid power plant
ASME Turbo Expo. GT2009-59859, 2009

 

[24] Christian Kasper, Martin Rose, Stephan Staudacher, Jochen Gier:
A Study of Unsteady Secondary Flow in a Water Flow Axial Turbine Model
ASME Turbo Expo. GT2008-50239, 2008

 

[23] Stefan Bretschneider, Frank Rothe, Martin Rose, Stephan Staudacher:
Compressor Casing Preliminary Design Based on Features
ASME Turbo Expo. GT2008-50102, 2008

 

[22] Holger Lipowsky, Stephan Staudacher, Daniel Nagy, Michael Bauer:
Gas Turbine Fault Diagnostics Using a Fusion of Least Squares Estimations
and Fuzzy Logic Rules
ASME Turbo Expo. GT2008-50190, 2008

 

[21] Ernst Schneider, Stephan Staudacher, Bruno Schuermans, Haiwen Ye:
Model Based Active Combustion Control Concept for Reduction of Pulsations
and NOx Emissions in Lean Premixed Gas Turbine Combustors
ASME Turbo Expo. GT2008-50326, 2008

 

[20] Holger Schulte, Klaus-Jürgen Schmidt, Arne Weckend, Stephan Staudacher:
Multi-Stage Compressor Model for Transient Performance Simulations
ASME Turbo Expo. GT2008-51159, 2008

 

[19] Thomas Schumann, Martin G. Rose, Stephan Staudacher, Jochen Gier,
Thomas Schröder:
The Effects of Steady Injection on an Ultra High Lift Vane in a LP Turbine
ASME Turbo Expo. GT2008-50330, 2008

 

[18] Florian Kroll, Annette Nielsen, Stephan Staudacher:
Transient Performance and Control System Design of Solid Oxide Fuel
Cell/Gas Turbine Hybrids
ASME Turbo Expo. GT2008-50232, 2008

 

[17] Gerrit Schütte, Stephan Staudacher:
Probabilistic Design Analysis of Scramjets
AIAA/ASME/ASCE/AHS/ASC STRUCTURES, STRUCTURAL DYNAMICS,
AND MATERIALS CONFERENCE. AIAA 2008-1811, 2008

 

[16] Olivia Arago, Stefan Bretschneider, Stephan Staudacher:
A unit cost comparison methodology for turbofan engines
ASME Turbo Expo. GT2007-27485, 2007

 

[15] Wolfgang Horn, Klaus-Jürgen Schmidt, Stephan Staudacher:
Effects of Compressor Tip Injection on Aircraft Engine Performance and
Stability
ASME Turbo Expo. GT2007-27574, 2007

 

[14] Philipp Zeller, Stephan Staudacher:
Exergy Analysis for the Performance Evaluation of Different Setups of the
Secondary Air System of Aircraft Gas Turbines
ASME Turbo Expo. GT2007-27278, 2007

 

[13] Jan Bierkamp, Sabine Köcke, Roland Fiola, Stephan Staudacher:
Influence of ATF Dynamics and Controls on Jet Engine Performance
ASME Turbo Expo. GT2007-27586, 2007

 

[12] Stefan Spieler, Stephan Staudacher, Roland Fiola, Peter Sahm, Matthias
Weißschuh:
Probabilistic Engine Performance Scatter and Deterioration Modeling
ASME Turbo Expo. GT2007-27051, 2007

 

[11] Ernst Schneider, Stephan Staudacher, Bruno Schuermans, Haiwen Ye,
Thiemo Meeuwissen:
Real-Time Modelling of the Thermoacoustic Dynamics of a Gas Turbine Using
a Gaussian Process
ASME Turbo Expo. GT2007-27468, 2007

 

[10] Rasmus Merkler, Stephan Staudacher:
Modelling Of Heat Transfer And Clearance Changes In Transient Performance
Calculations – A Comparison
ASME Turbo Expo. GT2006-90041, 2006

 

[9] Bauer M., Staudacher S.:
Fully Automated Model Based Performance Analysis Procedure For
Online And Offline Applications
ASME GT 2006-91050, Barcelona, Spain

 

[8] Ulf Schirmeister, Stephan Staudacher:
Operational Performance Analysis Of An Externally Fired Gas Turbine
ASME Turbo Expo. GT2006-90830, 2006

 

[7] Benedict Franke, Stephan Staudacher, Stefan Spieler, Dirk Gebser:
Factory and Process Simulation in Aero-Engine Component Manufacturing
ASME Turbo Expo. GT2005-68309, 2005

 

[6] Anja Feja, Bernd Banzhaf, Stephan Staudacher:
Modelling of accessories power demand at low power regimes
ASME Turbo Expo. GT2005-68185, 2005

 

[5] Christopher Boll, Stephan Staudacher, Stefan Spieler, Dirk Gebser:
Supply Chain Simulation and Economical Evaluation of Forged Titanium Discs
for Aircraft Engines
ASME Turbo Expo. GT2005-68310, 2005

 

[4] Kotulla M., Staudacher S.:
Power Management and Controls Of A Propulsion System For A Lighter
Than Air High Altitude Platform
ASME Turbo Expo. GT2005-68395, 2005

 

[3] Matthias Weißschuh, Stephan Staudacher:
Investigation on the Influence of a Core Chevron Nozzle on the Performance of
a Modern Bypass Engine
ASME Turbo Expo. GT2004-53212, 2004

 

[2] Annette Nielsen, Christoph Moll, Stephan Staudacher:
Modeling and Validation of the Thermal Effects on Gas Turbine Transients
ASME Turbo Expo. GT2004-53344, 2004

 

[1] Marc Förstemann, Stephan Staudacher:
Optimizing the Architecture of Civil Turbofan Engines to Improve Life Cycle
Costs/Value Added
ASME Turbo Expo. GT2004-53221, 2004

 

Unreviewed Conference Papers:

 

[71] Leitner M. W., Zippel M., Staudacher S.:
Interaction of Tip Leakage Flow With Incoming Flow in a Compressor Cascade
Exceeding The Stability Limit
Deutscher Luft- und Raumfahrtkongress, Doc. ID 450090, 2017

 

[70] Barth F., Staudacher S.:
Dew Point Measurement At The Stuttgart University ATF
Deutscher Luft- und Raumfahrtkongress, DLRK-2017-0011, 2017

 

[69] Schmidt N, Grauer F., Pfitzner J. G., Staudacher S., Vogeler K.:
Modelling approach for calculation of leading edge deterioration off fan blades due
to erosion during the engine pre-design process
International Symposium on Airbreathing Engines, ISABE-2017-21385, 2017

 

[68] Feil M., Staudacher S.:
Uncertainty Quantification of a Generic Scam Jet Engine Using Two Different
Methdods
Deutscher Luft- und Raumfahrtkongress, DLRK-2016-0011, 2016

 

[67] Leitner M., Zippel M. Staudacher S.:
The Interaction of Tip Leackage Flow With Incoming Flow in a Compressor
Cascade
Deutscher Luft- und Raumfahrtkongress, DLRK-2016-0023, 2016

 

[66] Helena Vogel, André Kando, Holger Schulte, Stephan Staudacher:
Klassifikation von Einflussfaktoren auf das Alterungsverhalten von
Serientriebwerken unter Verwendung von Flugdaten
Deutscher Luft- und Raumfahrtkongress, DLRK-2015-370074, 2015

 

[65] Volkan Tasdelen, Johann Hertel, Roland Fiola, Stephan Staudacher:
A Numerical Investigation On Ingested Water Separation In Modern Turbofan
Engines
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340026, 2014

 

[64] Jochen Rendle, Stephan Staudacher:
Assessment Of The Assemblability Of Aero Engines On The Basis Of A LPT
Module
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340009, 2014

 

[63] Marcus Schrade, Stephan Staudacher:
High-Speed Test Rig For The Investigation Of Erosion Damage Of Axial
Compressor Blades
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340033, 2014

 

[62] Manuela Gehrer, Hartmut Seyfried, Stephan Staudacher:
Life Cycle Assessment of BtL as Compared to HVO Paths in Alternative Aviation
Fuel Production
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340090, 2014

 

[61] Nicolas Neuburger, Christian Kasper, Stephan Staudacher:
Structured Approach to the Design of Test Campaigns
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340166, 2014

 

[60] Marianne Lauerwald, Stephan Staudacher:
The Aircraft Engine Game – System Dynamics of the Aerospace Industry
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340058, 2014

 

[59] Andreas Putz, Stephan Staudacher:
Uncertainties in Engine Condition Monitoring Based on Take-Off Data Due To
Transient Effects
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340037, 2014

 

[58] Christian Kasper, Jan Georgi, Stephan Staudacher
Überlegungen zum Antrieb skalierter Versuchsträger
Deutscher Luft- und Raumfahrtkongress, DLRK-2014-340063, 2014

 

[57] Jan Georgi, Stephan Staudacher:
Characteristics of Ejectors On Small Gas Turbine Engines
Deutscher Luft- und Raumfahrtkongress, DLRK-2013-301339, 2013

 

[56] Manuela Gehrer, Hartmut Seyfried, Stephan Staudacher:
Die Ökobilanz als Werkzeug zur Beurteilung alternativer Kraftstoffe in
Turboluftstrahltriebwerken
Deutscher Luft- und Raumfahrtkongress, DLRK-2013-301319, 2013

 

[55] Florian Schmidt, Stephan Staudacher:
Generalized Analysis Of The Potential Of Thermodynamic Cycles For Future
Aircraft Propulsion Systems
Deutscher Luft- und Raumfahrtkongress, DLRK-2013-301350, 2013

 

[54] Meinrad Weisser, Sebastian Bolk, Stephan Staudacher:
Hardware-In-The-Loop-Simulation Of A Feedfordward Multivariable Controller For
The Altitude Test Facility At The University Of Stuttgart
Deutscher Luft- und Raumfahrtkongress, DLRK-2013-301179, 2013

 

[53] Laura Vranos, Stephan Staudacher:
Modeling Transient Phenomena in Performance Synthesis
Deutscher Luft- und Raumfahrtkongress, DLRK-2013-301181, 2013

 

[52] Andreas Putz, Vitali Abel, Stephan Staudacher:
Turbomachinery Deterioration Modeling For The Prediction of Gas Turbine
Maintenance
Deutscher Luft- und Raumfahrtkongress, DLRK-2013-301467, 2013

 

[51] Jonathan Kuschke, André Kando Holger Schulte Stephan Staudacher:
Assessment of In-Service Measurement Uncertainty and its Impact on Performance
Recovery Analysis of Overhauled Civil Turbofan Engines
International Symposium on Airbreathing Engines ISABE-2013-1325, 2013

 

[50] Jonathan Kuschke, André Kando Holger Schulte Stephan Staudacher:
Assessment of Modeling Uncertainties Impact on Performance Recovery Analysis
of Overhauled Civil Turbofan Engines
International Symposium on Airbreathing Engines ISABE-2013-1330, 2013

[49] Carsten Schneider, Daniel Schrack, Martin Rose, Stephan Staudacher, Yavuz
Guendogdu, Karl Engel:
On the interaction of streamwise vorticity with a rotating turbine blade
European Turbomachinery Conference ETC2013-022, 2013

 

[48] Günter Kappler, Stephan Staudacher:
Gewichtsstudie zu Niederdrucksystemen moderner Turbofan-Triebwerke
Deutscher Luft- und Raumfahrkongress, DLRK-2012-281332, 2012

 

[47] Jan Georgi, Stephan Staudacher, Sergei Falaleev:
Modelling of an ejector for turbine aeroengines for application in performance
synthesis tools
ELSEVIER International Scientific and Technical Conference. No 3-1(27), 2011

 

[46] Reményi, C., Staudacher, S.: MRO: Organisation der Produktion sowie von
Produktionsplanung und -steuerung
wt Werkstattstechnik online, Vol. 101, No. 4, pp. 242-248
Springer-VDI-Verlag, 2011, Düsseldorf

 

[45] Remenyi, C., Staudacher, S., Holzheimer, N., Schulz, S.:
Simulation von Reihenfolgeregeln in einem Triebwerkswartungsunternehmen,
Productivity Management, Vol. 16, No. 1, pp. 16-19, Gito Verlag, 2011, Berlin

 

[44] Gräter, F., Staudacher, S., Weißschuh, M.:
Unterstützung des Triebwerk-Monitorings durch eine modellbasierte
Alterungsvorhersage
Deutscher Luft- und Raumfahrt Kongress, DLRK2010-161158, 2010

 

[43] Müller, M., Staudacher, S., Friedl, W.-H., Köhler, R., Weißschuh, M.:
Probabilistische Modellierung des Einflusses variierender Umwelt- und
Betriebsbedingungen auf die Triebwerksinstandhaltung
Deutscher Luft- und Raumfahrkongress, DLRK-2010-161615, 2010

 

[42] Klötzer, A., Staudacher, S., Wachter, J., Weißschuh, M.:
Entwicklung eines Prüfstands zur Vermessung gemischter Abgassysteme unter
Höhenbedingungen
Deutscher Luft- und Raumfahrtkongress, DLRK-2010-161156 , 2010

 

[41] Kasper, C., Aurahs, L., Rose, M., Staudacher, S., Gier, J.:
Water Flow Model Turbine Flow Visualization Study of the Unsteady Interaction of
Secondary Flow Vortices With The Downstream Rotor'
European Turbomachinery Conference, ETC2009-191, 2009

 

[40] Ries, T., Baumann, J., Rose, M., Rist, U., Staudacher, S.:
LP turbine laminar separation bubble study: Flat plate DNS calculations and
preliminary PIV data
European Turbomachinery Conference, ETC2009-266, 2009

 

[39] Dominik Giugno, Stephan Staudacher, R. Lück, Wolfgang Berns.:
Lebensdauerbeobachtung von Triebwerksschnellwechseleinheiten am Beispiel des
Luftturbinenstartermotors
Deutscher Luft- und Raumfahrtkongress, DLRK-2009-121209, 2009

 

[38] Daniel Nagy, Stephan Staudacher:
An Enhanced Fusion Approach For Fault Allocation Based on a Limited Number of
Measurements
Deutscher Luft- und Raumfahrtkongress, DLRK-2009-121373, 2009

 

[37] Jenny Baumann, Tobias Ries, Martin Rose, Stephan Staudacher, Irene Raab:
Actuated Transition In LP Turbine Laminar Separation – An Experimental Approach
Deutscher Luft- und Raumfahrtkongress, DLRK-2009-121277, 2009

 

[36] Schinko, N., Rose, M., Kürner, M., Staudacher, S., Gier, J. , Raab, I. , Lippl, F.:
Das ATRD-Projekt - Ein Beispiel für die Zusammenarbeit von Industrie und
Universität zur Förderung der Grundlagenforschung an Niederdruckturbinen
Deutscher Luft- und Raumfahrtkongress, DGLR–2009–121156, 2009

 

[35] Lutz Aurahs, Martin Rose, Stephan Staudacher.:
Experimental Investigation of Unsteady Interaction of Secondary Flows in a Turbine
Stage
Deutscher Luft- und Raumfahrkongress, DLRK-2009-1158, 2009

 

[34] Stefan Bretschneider, Stephan Staudacher:
Introduction to the VITAL TERA2020 Techno-Economic and Environmental Risk
Assessment Tool
5th European Congress on Computational Methods in Applied Sciences and
Engineering , 2008, Venice, Italy

 

[33] Arne Weckend, Klaus-Jürgen Schmidt, Stephan Staudacher, Heike Heidkemper:
Bewertung von Verdichtermodellierungen mit Stufenaufbauverfahren in der
Triebwerksleistungsrechnung
Deutscher Luft- und Raumfahrtkongress, Document ID: 081223, 2008

 

[32] Wolfgang Horn, Sabine Ardey, F. Grauer, Klaus-Jürgen Schmidt, Stephan
Staudacher:
Opportunities and Challenges for More Intelligent Gas Turbine Engines
Deutscher Luft- und Raumfahrtkongress, 2008

 

[31] Daniel Nagy, Stephan Staudacher, Michael Bauer:
Optimale Auswahl der Serieninstrumentierung moderner Gasturbinen
Deutscher Luft- und Raumfahrtkongress, Document ID: 081200, 2008

 

[30] Schütte, G., Staudacher, S.:
Non-Deterministic Analysis of a Scramjet Propulsion System
1st DGLR-CEAS Conference 2007, DGLR-CEAS 2007-366, 2007

 

[29] Bretschneider, S., Staudacher, S.:
A Feature Based Design Approach to High Pressure Compressor Peliminary
Design for Civil Aircraft Propulsion Systems
1st DGLR-CEAS Conference 2007, DGLR-CEAS 2007-217, 2007

 

[28] Bretschneider, S., Arago, O., Staudacher, S.:

Architecture of a Techno and Environmenteal Risk Assessment Tool Using

a Mulit-Modular Build Approach

International Symposium on Airbreathing Engines, ISABE-2007-1103, 2007

 

[27] Stefan Spieler, Stephan Staudacher, Roland Fiola, Peter Sahm:
Merkmalsbasierte Modellierung von Produktionsschwankungen bei
Flugzeugtriebwerken
Deutscher Luft- und Raumfahrkongress, DGLR – 2006 – 159, 2006

 

[26] Stefan Spieler, Stephan Staudacher, Gregor Kappmeyer, W. Lou:
Reparaturverfahren und Ihre Bedeutung für die Bewertung von BLISKS
über den Lebenszyklus von Flugtriebwerken
Deutscher Luft- und Raumfahrtkongress, DGLR – 2006 – 160, 2006

 

[25] Bernd Banzhaf, Stephan Staudacher:
Untersuchungen zum Betriebsverhalten des Triebwerksmischers im
niedrigen Lastbereich
Deutscher Luft- und Raumfahrkongress, DGLR – 2006 – 095, 2006

 

[24] Sabine Köcke, Stephan Staudacher, Jan Bierkamp, Wolfgang Berns:
Simulation des Gesamtsystems bestehend aus Höhenprüfstand und
Triebwerk
Deutscher Luft- und Raumfahrtkongress, DGLR – 2006 – 232, 2006

 

[23] Thomas Schumann, Christian Kasper, Stephan Staudacher, Jochen Gier.:
Untersuchung von geometrischen Einflussparametern bei Grenzschicht –
einblasung an hochbelasteten Niederdruckturbinenprofilen am
Wasserkanal
Deutscher Luft- und Raumfahrtkongress, DGLR – 2006 – 192, 2006

 

[22] Gerlach C., Lippl F., Filipovic D., Homburg R., Glaeser B., Staudacher S.:
CLEAN – Anpassung des Prüfstands und Test für ein Demonstrator –
Triebwerk am ILA Stuttgart
Deutscher Luft- und Raumfahrtkongress, DGLR – 2005 – 235

 

[21] Feja A., Staudacher S.:
Brennkammermodellierung zur Leistungsberechnung von
Turboflugtriebwerken im niedrigen Lastbereich
Deutscher Luft- und Raumfahrtkongress, DGLR – 2005 – 186

 

[20] Merkler R., Staudacher S., Schölch M., Schulte H., Schmidt K. J.:
Simulation of Clearance Changes and Mechanical Stresses in Transient
Gas Turbine Operation by a Matrix Method
AIAA 2005

 

[19] Merkler R., Staudacher S., Schölch M., Schulte H.:
Description of Thermal Effects in Aero Engines by Matrices
International Symposium on Airbreathing Engines, ISABE-2005-1071, 2005

 

[18] Kokanovic S., Schürmanns B., Berns W., Staudacher S.:
Process Modelling of Nox Emissions and Pulsation of Gas Turbine
Combustion and Control Concept
International Symposium on Airbreathing Engines, ISABE 2005-102, 20051

 

[17] Merkler, R., Staudacher, S., Schölch, M., Schulte, H.:
Description of Thermal Effects in Aero Engines by Matrices
International Symposium on Airbreathing Engines ISABE-2005-1071, 2005

 

[16] Stanka Kokanovic, Wolfgang Berns, Haiwen Ye, Bruno Schuermanns, Stephan
Staudacher:
Echtzeitmodellierung von NOX-EMISSIONEN und Druckpulsationen mittels
eines Gaußschen Prozesses
Deutscher Luft- und Raumfahrkongress, DGLR-JT2004-090, 2004

 

[15] Kotulla, M., Staudacher, S.:
Grundsätzliche Überlegungen zur Architektur des Antriebs einer
Leichter als Luft Höhenplattform
Deutscher Luft- und Raumfahrtkongress, DGLR-2004-149, 2004

 

[14] Spieler, S., Staudacher, S., Gebser, D.:
Positionierung von Triebwerksherstellern in der Zulieferkette von
Titanschmiedeteilen
Deutscher Luft- und Raumfahrtkongress, DGLR-2004-157, 2004

 

[13] Köhli, R., Staudacher, S., Schulte, H., Schmidt, K.-J.:
Validierung eines Performancemodells für ein Turbofantriebwerk im
tiefen Teillastbereich
Deutscher Luft- und Raumfahrtkongress, DGLR-2004-180, 2004

 

[12] Matthias Weißschuh, Nadine Kaminski, Stephan Staudacher.:
Ökonomische Bewertung von zur Lärmminderung eingesetzten
Chevrondüsen
Deutscher Luft- und Raumfahrtkongress, DGLR-JT2004-086, 2004

 

[11] Staudacher, S., Gebser, D., Kappmeyer, G., Wesemann, R.:
Produktionsorientierte Entwicklung von Turboluftstrahltriebwerken
DGLR Jahrestagung, 2003

 

[10] Staudacher, S., Kern, M., Gebser, D.:
Next Generation Manufacturing - die langfristige Sicherung des Luftfahrt-
Produktionsstandortes Deutschland
DGLR Jahrestagung, 2003

 

[9] Staudacher, S., Förstemann, M.:
Lebenszyklus-Wertbeitrag von Flugtriebwerken
DGLR Jahrestagung, 2003

 

[8] Merkler, R., Staudacher, S., Schmidt, K.-J.:
Modellierung des Luftsystems von Turboflugtriebwerken für die
Anwendung in Leistungssyntheseprogrammen
DGLR Jahrestagung, 2003

 

[7] Moll C., Nielsen A., Staudacher S.:
Derivation and Validation Of State Space Models To Predict Heat
Transfer And Clearance Changes On Gas Turbine Transients
CEAS 2003

 

[6] Staudacher, S., Berns, W., Haiwen Y.:
Modeling multistage compressors by several split compressors
ISABE Paper, 2003

 

[5] Schilling, F., Staudacher, S., Student, J.:
The design of the ILA001 Micro Gas Turbine
International Symposium on Airbreathing Engines, ISABE-2003-1184, 2003

 

[4] Kotulla, M., Staudacher, S., Abdullahi, H.:
A new method for online monitoring and trimming of pyrometer
measurements in high performance turbo engines
ISABE Paper, 2003

 

[3] Staudacher, S., Weißschuh, M.:
Numerical and Experimental Investigations on the Flow Phenomena of Chevron Nozzles
12th International Conference on Fluid Flow Technology
Conference on Modelling Fluid Flow (CMFF 03), pp. 652-660, 2003, Budapest, Ungarn

 

[2] Staudacher, S., Linke, A., Fiola, R.:
A comparison of methods for the extrapolation of turbomachinery
performance maps for the use in performance synthesis programs
European Turbomachinery Conference, 2002

 

[1] Staudacher S.:
Modeling of Gas Turbine Cooling Air Systems
International Symposium on Airbreathing Engines, ISABE-99-7013, 1999

  • Pflichtfach Luftfahrtantriebe und Turbomaschinen
  • Konstruktion von Flugtriebwerken
  • Einführung in diie Projektarbeit Luft- und Raumfahrttechnik
  • Turboflugtriebwerke
  • 1990-1999    BMW Rolls-Royce GmbH
  • 2000-2001    Rolls-Royce Deutschland
  • seit 07/01     Direktor des Instituts für Luftfahrtantriebe, Stuttgart
Zum Seitenanfang